Key features and benefits
Compact design push type master cylinder with two separate circuits
Equal pressure generated in each circuit
Suitable for hand brake where regulations specify that the original diagonal split to the rear brakes must be retained
Hole in push rod at one end for compact installation using a clevis
Breather port clearance (cut-off travel) calibrated during assembly to provide controlled lost travel
Scraper seals to prevent ingress of dust and debris
Non-standard push rods available on request
Nominal stroke: 12mm per circuit
Breather port clearance 0.7 – 1.0mm. Versions available with larger breather port diamater
Fluid inlet port 0.375-24 UNF. Tightening torque 17 – 20Nm with a copper washer.
Fluid outlet port 0.375-24 UNF. Tightening torque 17 – 20Nm with a copper washer.
To avoid trapping air inside the master cylinder, install it with the ports uppermost
Average weight 0.26Kg